(Turpentine-Based Acrylic Resin with Matting Agent)
Matisse MM15 Matt Varnish produces a hard, non-yellowing, protective coating with a subdued matt sheen formulated to match the sheen of Matisse paint films. It is nearly invisible with one of the lowest sheen levels available whilst still remaining clear and free of haze. Unlike water-based varnishes, this varnish is removable or strippable, and can be re-dissolved in mineral turpentine, which has no effect on Matisse acrylic paints: thus a painting may be completely cleaned and re-varnished without affecting the painted surface. MM15 Final Varnish Matt Finish is an ideal varnish for use in restoration work (may be used on oil paintings).
A minimum of two coats are recommended for a consistent subdued sheen finish. Drying time is approximately 6-8 hours depending upon weather conditions. This product is also suitable for use over oil paints after they are completely dry (approximately 6-12 months).
This varnish should be stirred thoroughly as it contains a matting agent which will, in storage, tend to settle out and fall to the bottom of the container. It is clear and cannot be easily seen therefore always mix this varnish with a clean stick or mixing spatula before use. Shaking the container is not recommended as bubbles may form that can impact the final finish.
For more details, see our dedicated “Varnish Techniques” page in our Derivan website.
DISCLAIMER: Although Matisse Derivan products are formulated to the highest standards and extensively tested, we strongly recommend a small test be undertaken before any varnish is being applied to the final surface. If you have any questions regarding the use or application of any Matisse Derivan products, please contact us on: (02) 9736 2022 or email your query to email@example.com
It is recommended to clean your brush as soon as you finish the application. Always clean brushes with mineral turpentine first. This will remove most of the traces of varnish from the brush. Finish by using liquid or bar of soap in the palm of your hand and scrub the brush back and forth until you form a lather. Rinse well and let dry flat. Using soap and lukewarm water will condition the brush’s hair and prevent it from becoming stiff after drying due to any turpentine (or other solvent) residue left on them.
Safety Data Sheet (SDS-GHS Compliant)
To view or download a copy of MM15 SDS, please CLICK HERE (212kb)
The CL (Cautionary Labeling) Seal identifies products that are certified to be properly labeled in a program of toxicological evaluation by a medical expert for any known health risks and with information on the safe and proper use of these materials. These products are also certified by ACMI to be labeled in accordance with the chronic hazard labeling standard, ASTM D4236. Products with this seal are not hazardous if used correctly. It is important to read the product label in full before opening a product that has the CL Seal. These products should never be given to children 3 years or under or anyone with a physical or mental handicap who is unable to read and understand safety labeling on packages.
WARNING: COMBUSTIBLE, MAY BE HARMFUL IF SWALLOWED. VAPOUR HARMFUL. SKIN IRRITANT. EYE IRRITANT. CONTAINS ALIPHATIC HYDROCARBONS <60%
PRECAUTIONS: KEEP AWAY FROM SPARKS AND OPEN FLAMES – NO SMOKING. WEAR PROTECTIVE GLOVES AND EYE AND FACE PROTECTION. WASH HANDS THOROUGHLY AFTER HANDLING. DO NOT DRINK, EAT OR SMOKE WHEN USING THIS PRODUCT.
STORAGE: STORE LOCKED UP IN A WELL VENTILATED PLACE. KEEP COOL.
DISPOSAL: DISPOSE OF CONTENTS AND/OR CONTAINER ACCORDING TO LOCAL REGULATIONS.
IF SWALLOWED: IMMEDIATELY CONTACT A LOCAL POISON CONTROL CENTRE. IN AUSTRALIA ph: 13 11 26; IN NEW ZEALAND ph: 0800 764 766; IN US ph: 1-800-222-1222 OR DOCTOR/PHYSICIAN. RINSE MOUTH.
IF ON SKIN (OR HAIR): TAKE OFF CONTAMINATED CLOTHING AND WASH BEFORE RE-USE. IF SKIN IRRITATION OCCURS, GET MEDICAL ADVICE OR ATTENTION. RINSE SKIN USING PLENTY OF SOAP AND WATER.
IN CASE OF FIRE: USE POWDER OR DRY CHEMICAL FOR EXTINCTION. DO NOT USE WATER AS THIS MAY SPREAD THE FIRE.
|Pictogram||GHS Classification||Hazard Statement|
|H226 Flammable liquid and vapour.|
|Skin corrosion - Category 2|
Serious eye damage/irritation - Category 2A
Specific target organ toxicity (single exposure) - Category 3
|H315 Causes skin irritation.
H39 Causes serious eye irritation.
H335 May cause respiratory irritation.
|H304 May be fatal if swallowed and enters airways.|
|Chronic aquatic toxicity|
|H411 Toxic to aquatic life with long lasting effects.|
Still got questions? Send us an email.